• Home
  • About
  • Tutorials
  • Recipes
  • Furniture
  • Contact
    • Contact
    • Infertility
    • Disclosure
    • Privacy Policy
  • Shop
    • Facebook
    • Instagram
    • Pinterest

Reality Daydream

The Dream is Free, The Hustle Sold Separately

  • Home
  • About
  • Tutorials
  • Recipes
  • Furniture
  • Contact
    • Contact
    • Infertility
    • Disclosure
    • Privacy Policy
  • Shop

Living Room Crown Molding Reveal and Tutorial (Part 1)

March 12, 2013 by Bethany Sy

Tuesday greetings my fun-loving people! I’ve done ransacked the computer from Beth for two full days. Just kidding… but seriously your stuck with me for the next two days to talk about crown molding and shelving! Molding? Moulding? Who really knows how to spell it. Google says both are correct.

Part of our vision of the living room was to have it crowned. So this last weekend was a busy one as we purchased, cut, installed, caulked and primed crown molding in the living room!

Today we’re going to discuss the basics of crown molding, with an emphasis on the inside corner joints. Tomorrow, we’ll discuss the outside corner joints!

Crown Molding Tutorial (Part 1) by Sawdust and Embryos

Let’s get started – WAIT! Did you let your lumber acclimate to the room?  This is a important step that if ignored will wreck havoc on your crown molding.  You need to store your trim in the room it will be going in for at least a few days.  The reason being that they need to be at a similar moisture and temperature level as the room.  Therefore if the moisture level is higher when it is installed it will shrink and leave gaps when the moisture draws out. if it is lower it will expand and bow between joints and nails. This is not good friends, Don’t hate, acclimate!

First thing first, We gotta find them studs! Typically I use my tried and true finger tapping method, but since there is slat and lath behind the drywall (as with many OLD houses), there are too many layers to hear the difference where the studs are located. So I decided to give this stud finder a try… it worked!

Crown Molding Tutorial (Sawdust & Embryos) Crown Molding Tutorial (Sawdust and Embryos)

After seeing what we did with our wall-removal and building the arches, RYOBI contacted us and wanted to team up with us on our molding project, and provided us with some tools for the task! More on that in a minute!

Ryobi Nation - leaderboard1

There are three main techniques when it comes to cutting Crown Molding.

  1. The first is to hold it up against the fence of the saw at the angle it will be installed or use a Kreg Jig for a little more accuracy. This is a good option if you do not have a sliding compound miter saw. YHL has a good tutorial using this method here.
  2. The second is to to use butt seams on the back wall and then cope the joints to meet the crown molding. This requires mad coping skills.  I am not going to lie I tried this method and failed. My crown molding looked like the remnants of a beavers mid-morning snack.  If you’re up for the challenge and want a stellar miter joint, Home Depot has a good tutorial here.
  3. The third is what we are talking about today: using a compound miter saw you can create any angle you dream up and we cut mad miter joints out the wazooo.

With our most recent acquisition of a sweet RYOBI sliding compound miter saw, we used a technique that uses compound angles while keeping the peace of trim flat on the table. Why would you want to do this?  You will get a cleaner more precise cut.

Crown Molding Tutorial using Ryobi Tools {Sawdust and Embryos}The miter saw makes it easy because you find the angle you want in the number bar, click it in place, and cut! RYOBI most have known that individuals would most likely be cutting crown molding because they highlighted those angles and dedicated a page in their user manual specifically for crown molding.  What’s that, a guy that reads user manuals?  This guy does! And I’m not afraid to admit it. This RYOBI miter saw even has a laser that shows you right where your cut will be for added confidence.

Below is the specific page outlining the important points of using this tool for cutting molding joints. I found it very helpful. (Click to see larger)

Fullscreen capture 3122013 84633 AM Ryobi Nation - 160x600_1

Source

Check out this sexy beast. (Not me, the tool… LOOK AT THE TOOL!).

Crown Molding Tutorial using Ryobi Miter Saw {Sawdust and Embryos}

Alrighty, back on topic! I ripped down some 1X4’s to the same angle as the crown molding and screwed them to the studs using 2 1/2 inch torque screws.

Crown Molding Tutorial {Sawdust & Embryos}

When you rip the 1X4’s be sure to cut them short enough that there will be approximately a 1/4 inch gap between the crown molding and the back board. The reason for this is because you want the crown molding to spring against the wall and ceiling.  Minimizing gaps and imperfections on your wall and ceiling.

Crown Molding {Sawdust and Embryos}

Just in case your separation anxiety has set in, here is a picture of my sweet new RYOBI Miter saw. Beth may have to sleep on the couch tonight… since I will be found cradling and caressing my sweet new saw; just kidding, but seriously? In our experience, RYOBI manufactures very high-quality power tools, with lots of extras for convenience. This miter saw made this project simple and fun! We’re so honored that they wanted to team up with us!

Crown Molding Tutorial - Ryobi Miter Saw {Sawdust and Embryos}

I try to mark the angles on each piece by holding them up to the wall (as to help my visually challenged brain).  Every time I thought I had it down and decided to bypass the marking, I ended up with a mis-cut.  Judging by the pile of scraps this happened a lot… luckily, when it mattered, I was subconsciously smart enough to mark the board and didn’t have to bust into any of my extra molding.

Tip! On inside corners the bottom will always point to the corner.  Seems simple, but this helped me out more than once.

Crown Molding (Sawdust and Embryos)

Time to install this sweet, succulent, crown! Holding it tightly, I drilled a pilot hole and nailed the crown in place. I leave the nail sticking out about a 1/4 inch and then hammer it in the rest of the way with a nail set.  Don’t forget to set the nails about a 1/16 inch below the surface of the crown molding.

Crown Molding Tutorial {Sawdust and Embryos}

Bing, Bang, Bong, just like that the crown molding is up and it is time to get out the caulk! It is really hard not to joke about this.  Beth and I spent a lot of time throwing around ‘caulk jokes’.  It made for a hilarious and fun pleasant caulking environment. But really, you do need to be gentle and precise when you’re handling caulk.

Caulking Crown Molding {Sawdust and Embryos}

I think the pictures explain thing well enough here, as I am about to fall over from laughter!

Below are some reveal pictures! The lighting wasn’t great… it’s been cloudy for several days. But I think you’ll get the picture! The molding really finishes the room off and makes things feel crisp and fresh.

P3101653

P3101654

P3101658 P3101651

We hope you’ll come back tomorrow for instructions on molding an outside corner joint on the little shelf we made, as well as a price breakdown for this project.

If you’re interested in how we did the ‘board and batten’, click here! And for details of Beth’s tedious stenciling project, click here!

Crown Molding Tutorial (Part 1) by Sawdust and Embryos

Thanks for stopping by!blank - Copy (3)

 

 

~This post is sponsored by RYOBI! And although we weren’t paid, we were provided with product to review. All opinions are 100% our own! You know we tell it like it IS ‘round these parts!

Ryobi Nation - leaderboard1

Related:

  • Centerpiece Tray Tutorial
    Wooden Centerpiece Tray Tutorial

    I have a fun and easy building project for you! And while I do end…

  • DIY fabric-wrapped bulletin boards
    DIY Fabric-Covered Bulletin Tutorial

    My kids are getting to the age where they want to tape pictures, cards, notes...…

  • Master Bathroom Reveal

    WHAT A JOURNEY! What a labor of love! What a pain in the booty! I…

About Bethany Sy

Nick and Bethany Sy are the creative free-spirits behind DIY/Lifestyle blog, Reality Daydream. They recently purchased a historic mansion and have been documenting the ups and downs of renovation and making this home their own... all while sharing tips and tutorials along the way! When they found themselves in the trenches of infertility, they started a journey that would prove to be their most important DIY project ever, and have 3 beautiful girls to show for it. <3

« Random Matters
Crown Molding Shelf Ledge above Wainscotting »

Comments

  1. 20

    Joffer says

    April 7, 2021 at 11:09 am

    Well this is awesome post and written very well. Your point of view is very good.

    Reply
  2. 21

    Rachel Cook says

    November 23, 2015 at 7:29 am

    Such a great tutorial. So, I am totally going to order the stencil for this wall from the link you left me on your tutorial about building your own frames. One of the last photos on this tutorial makes your walls look like the dusty blue color we just painted our living room and my husband is TOTALLY sold on the idea of copying you shamelessly. Thanks guys for the great inspiration!!!

    Reply
  3. 22

    Anonymous says

    March 22, 2013 at 1:58 pm

    now, where did you get the wall paper?

    Reply
    • 23

      Beth @ Sawdust and Embryos says

      March 22, 2013 at 3:13 pm

      It’s not wallpaper… it’s actually a stencil! here’s the post were I talk about that: https://realitydaydream.com/2013/02/operation-stencil-living-room-complete.html

      Reply
  4. 24

    Victoria says

    March 14, 2013 at 5:54 pm

    You guys crack me up! Love to read your blog and of course Ryobi wants to team up with you….you’re awesome!

    Reply
  5. 25

    Kenz @ Interiors by Kenz says

    March 13, 2013 at 5:03 pm

    That miter saw has me drooling all the way from Salt Lake City. I love this post. this is actually the first REAL COMPREHENSIVE POST on crown molding i’ve read. Aaron and I have dabbled with crown molding. We put it on the top of our cabinetry in the kitchen, and it was a million times more difficult than I anticipated.

    You and Beth are the bee’s knees. Keep being awesome.

    Reply
  6. 26

    Tim says

    March 13, 2013 at 2:47 am

    I want a RYOBI compound sliding miter saw!!!

    Reply
  7. 27

    maude says

    March 13, 2013 at 2:16 am

    A big congrats to you on your job of putting up the crown moulding. Your bravery and courage in this daunting endeavor is to be commended:)
    Maude

    Reply
  8. 28

    Renee says

    March 12, 2013 at 8:46 pm

    I wish you had posted this last week before my husband and I tried to cut a simple frame from some molding. It would have saved us from screwing up twice and having to re-cut! (It would have also saved us from a few choice words that were muttered under our breath also!) Your living room is turning out to be drool-worthy and I (we) look forward to your next tutorial on the dreaded crown molding!

    Reply
  9. 29

    ashley emmett says

    March 12, 2013 at 8:15 pm

    this is seriously the most in depth crown molding post ever! thanks!!!!

    Reply
  10. 30

    Jodi Stuber says

    March 12, 2013 at 6:02 pm

    This is gorgeous. Love the glitter in the paper too.. So pretty!
    Pinning for down the road when we have a house.

    Reply
    • 31

      Beth @ Sawdust and Embryos says

      March 12, 2013 at 6:09 pm

      Thanks Jodi! And it’s actually a stencil instead of wallpaper! We used Martha Stewart metallic paints, and it looks so shimmery and awesome!! 🙂 Thanks for pinning!

      Reply
  11. 32

    Erin @ The Impatient Gardener says

    March 12, 2013 at 5:48 pm

    Excellent tutorial … that totally obvious tip about the bottom corning pointing out on an inside corner is definitely filed away for future use.

    Two dumb questions for you:
    1. What is the purpose of the 1x4s? Is that so that THAT goes in the studs and you don’t have to worry about where to nail the molding?
    2. We have super skimpy molding (it’s not even real crown molding) in our kitchen that we were planning to go right over the top of (the new molding fits right over it). Can we just use the old molding to serve whatever purpose the 1×4 serves?

    Thanks! Pinning this and looking forward to tomorrow’s tutorial.

    Reply
    • 33

      Nick @ Sawdust and Embryos says

      March 12, 2013 at 6:07 pm

      Erin,

      Those are great questions that I totally forgot to address! Because this room was dry-walled right over the slat and lath I wanted to make sure that I had a good anchor. Typically you would only need to install the backer boards on the walls that are parallel with the joists… to have something to anchor your crown to.

      I would probably tear out the old molding for two reasons, the first is that who knows what it is anchored to and the second is for pride. Whenever I work on a project I want to know that the next owner whether it is 5 yrs or 50 yrs down the road will look at it and say “man whoever did this must have been a good carpenter”.

      Thanks for asking, I would hate for you to invest all your time and energy into something and then have to fix it a year later. Good luck!

      Reply
  12. 34

    Jenn says

    March 12, 2013 at 5:24 pm

    That is truly a stunning makeover. Love it!

    Reply
  13. 35

    Alexus Parker says

    March 12, 2013 at 5:03 pm

    Thanks – I want to do crown moulding in my made over bedroom – Now I have proper instructions, including pictures, on how to do it!

    Reply

Trackbacks

  1. Building a Floating Shelf in your Toilet Cove! - Sawdust and Embryos says:
    August 20, 2015 at 5:05 am

    […] we burnish the edges as we did on our crown moulding tutorial. Then fill the staple indentations with wood […]

    Reply
  2. A Tour of our Homestead! - Sawdust and Embryos says:
    May 28, 2015 at 4:23 pm

    […] following are tutorials for the board and batten, stencil job above the board and batten, and crown moulding. I also stripped and stained the front […]

    Reply
  3. How to build a Butcher Block Counter says:
    January 25, 2014 at 9:39 pm

    […] I had all the boards cut to width, I cut them down into smaller random sizes using our sweet Ryobi Miter saw, and separated the 3 different wood types into 3 different […]

    Reply
  4. Herringbone Patchwork Accent Wall {REVEAL!} says:
    November 15, 2013 at 11:31 am

    […] filled the seams and nail holes with white latex caulk (the same stuff we used on our crown moulding tutorial) and did some minor white paint touch-ups. And […]

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recipe Rating




  • Facebook
  • Instagram
  • Pinterest
  • RSS
  • YouTube
We are Nick and Bethany! Welcome to our blog, Reality Daydream where we share our DIY adventures!
Click here for lots of art projects using only wood stain on furniture!!
Please feel free to share or pin my posts! You're welcome to use ONE of my images (no collages or pinnables) with a link back to the corresponding post. Please do not edit or crop that single image in any way. Improper use of my photos, ideas or words is a violation of copyright. Thank you!

Categories

Attention: Almost any do-it-yourself project involves risk of some sort. Your tools, materials, and skills will vary, as will the conditions at your project site. Reality Daydream has made every effort to be complete and accurate in the instructions of the plans on this website. Reality Daydream will not assume any responsibility or liability for damages or losses sustained or incurred in the course of your project or in the use of the item you create. Always follow the manufacturer’s operating instructions in the use of tools, check and follow your local building codes, and observe all commonly accepted safety precautions.

 

Copyright © 2025 · Modern Blogger Pro On Genesis Framework · Customizations by Sweet Theory Designs · Privacy Policy · Log in